The Domino Trainer ARF comes out of the box 95% prebuilt and you can be out at the flying field in only a few hours. Build FAST- NO GLUEING OR SPECIAL TOOLS required, Just only two tools are all you need. It has sturdy all balsa/ply wood construction and is very stable in flight. The world of radio-controlled flight offers all kinds of adventures. If you're someone who's looking to begin the quest for adventure with a plane of your own, you've got a lot to look forward to. Start with success. Start with the Domino Trainer from Phoenix Model!!!

Technical data

- Wingspan: 1583mm (62.3in)
- Length: 1240mm (48.8 in)
- Flying weight: 2600-2800 gr
- Wing area: 44.3 dm2
- Wing loading: 65g/dm2
- Wing type: Naca airfoils
- Covering type: V-kote film
- Spinner size: Plastic 58mm (included)
- Radio: 4 channel minimum (not included)
- Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle (not included)
- Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)
- Servo mount: 21mm x 42 mm
- Propeller: suit with your engine
- Engine: .40-.46 / 2-stroke (not included)
- Motor: brushless outrunner
- Gravity CG: 75-80 mm (2.9-3.1 in) Back from the leading edge of the wing, at the fuselage
- Control throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo
- Control throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo
- Control throw Rudder: Low: 25mm right/left, 15% expo; High: 40mm right/left, 15% expo
- Experience level: Beginer
- Plane type: Trainer

RECOMMENDED MOTOR AND BATTERY SET UP
- Motor: RIMFIRE .46 (not included)
- Lipo cell: 4-6 cells / 4000-5000 mAh (not included)
- Esc: 50-60A (not included)

Feature

- Designed for compatibility with both GP and EP flight
- Build fast, no glueing or special tools required
- Extremely lightweight laser-cut all-wood construction
- All hardware included